Freescale Semiconductor Microcontrollers - Manual (Page 707)

Flash Programming
NVMC Graphical User Interface
707 Microcontrollers Debugger Manual
Another way to load an .FPP parameter file is by clicking the Browse button. This brings
up a standard Open dialog box, which you can use to select the file. When you do so, the
Open dialog box disappears, and the NVMC utility loads the file, automatically clearing
the Auto select according to MCUID: checkbox. In case of an error during loading, the
utility displays an appropriate message.
Figure 32.7 Open Dialog Box
If you check the Auto select according to MCUID: checkbox, the NVMC utility
searches for and loads the corresponding .FPP parameter file.
Click the OK button to close the NVMC dialog box. If the Auto select according to
MCUID: checkbox is clear, the NVMC utility saves the name of the selected
configuration file under the NV_PARAMETER_FILE entry of the project.ini file. If
you check this checkbox, the utility does not save the .FPP in the project file.
Click the Cancel button to close the dialog box without saving changes.