Freescale Semiconductor Microcontrollers - Manual (Page 565)

RS08 Open Source BDM Connection
First Steps From Within an Existing Project
565 Microcontrollers Debugger Manual
Reset to Normal Mode Option
Select RS08 Open Source BDM > Reset to Normal Mode to reset the hardware CPU to
normal mode.
Show Status Option
Select RS08 Open Source BDM > Show Status to display the Show Status Dialog Box .
RS08 Open Source BDM Setup Dialog Box
This dialog box is used to set up your communication device. The communication device
list menu shows the current OSBDM cables plugged into the computer.
Figure 26.5 RS08 Open Source BDM Setup Dialog Box
Select the OSBDM cable, then click the OK button to start debugging.
The Show Protocol checkbox and option is for Support usage only. When enabled,
debugger internal information is reported in the Command window.
TIP Cables are enumerated #1, #2, etc. in the order they have been plugged into the
computer USB hub.