Freescale Semiconductor Microcontrollers - Manual (Page 155)

Debugger Components
Visualization Utilities
155 Microcontrollers Debugger Manual
Drop Into
In Edit mode, the drag and drop functionality supplies a very easy way to automatically
configure an instrument.
To assign a variable, simply drag it from the Data Window onto the instrument.
The kind of Port is immediately set on “Memory” and the “Port to Display” field
contains the address of the variable. Now repeat the drag-and-drop on a bare portion of the
VisualizationTool window: a new text instrument is created, with correct port
configuration.
Some other components allow this operation:
• The memory window: select bytes and drag-and-drop them onto the instrument.
• The Inspector component: pick an object from the object pool.
Demo Version Limitations
Loads only one VisualizationTool window. Limits the number of instruments to three.