Freescale Semiconductor Microcontrollers - Manual (Page 48)

Debugger Interface
Debugger Main Window
48 Microcontrollers Debugger Manual
Figure 2.20 Component Menu
Table 2.6 describes the Component Menu entries.
NOTE For a readable display, we recommend using a proportional font (e.g., Courier,
Terminal, etc.).
Select Component > Open to load an extra component window that has not been loaded by
the Debugger at startup. The context-sensitive dialog box presents a set of different
components that are introduced in
Debugger Components .
Select Component > Set Connection and the Set Connection dialog box shown in Figure
2.21 is opened.
Table 2.6 Component Menu Description
Menu entry Description
Open Loads an extra component window that has not been loaded by
the Debugger at startup. The context-sensitive dialog box
presents a set of different components that are introduced in the
Typical Component Window Display section.
Set Connection Sets the Debugger connection.
Fonts Opens a standard Font Selection dialog box, where you can set
the font used by Debugger components.
Background Color Opens a standard Color Selection dialog box, where you can
set the background color used by the Debugger component
windows.