Freescale Semiconductor Microcontrollers - Manual (Page 470)

HCS08 P&E Multilink/Cyclone Pro Connection
Connection Procedure
470 Microcontrollers Debugger Manual
MultilinkCyclonePro Menu Description
When you select P&E Multilink/Cyclone Pro as your connection, the Connection menu’s
name is changed and other options are added.
Figure 19.4 Connection (MultilinkCyclonePro) Menu
Device Option
The Device option in the MultilinkCyclonePro menu allows the user to select the
particular Freescale processor that they wish to use. When choosing Device from the
MultilinkCyclonePro menu, extended menus open which allow you to select the family
(e.g. GB Family), and device type (e.g. 9S0GB60) of the MCU that you are using.
Figure 19.5 HCS08 Device Extended Menu
Connect Option
The Connect option initiates an attempt to communicate with the device selected under
the device section of the menu.