Freescale Semiconductor Microcontrollers - Manual (Page 607)

ColdFire V1 Full Chip Simulation Connection
FCS Visualization Utilities
607 Microcontrollers Debugger Manual
Interruption Keyboard Setup
The Interruption Keyboard Setup dialog box shown in Figure 28.29 allows you to set the
address of the lines port, the columns port, and the number of the interruption vector.
Figure 28.29 Interruption Keyboard - Setup Dialog Box
In the Port address section, for each two ports you can insert an address (in hexadecimal)
in the Lines field or select one of the five ports listed in the Columns field. These are used
when the component works with the
Programmable IO_Ports Component .
The Vector number filed allows you to specify an interruption vector number (in
hexadecimal).
The Keys label buttons permit you to change the symbols displayed on the keyboard keys.
Drag Out:
Nothing can be dragged out.
Drop Into:
Nothing can be dropped into the IT_Keyboard Component window.
Demo Version Limitations
No limitations.