Freescale Semiconductor Microcontrollers - Manual (Page 228)

Synchronized Debugging Through DA-C IDE
Configuring DA-C IDE for Freescale Tool Kit
228 Microcontrollers Debugger Manual
Click on OK to validate these settings. Select the Fibo.c file. Click on the Compiler
button (or from the main menu of DA-C select Start > Compile). This file is now
compiled and the corresponding object file (Fibo.o) is generated.
Linker Configuration
In the same way, you can now configure the linker as illustrated in Figure 9.8 . In the
Menu "Start" Actions, click on new and fill in the created New Action box with
"&Link", then validate with ENTER. After setting the corresponding bitmap, copy the
following lines shown in
Listing 9.2 in the Action Script field and change the directory to
where the linker is located.
Listing 9.2 Script for Linker Action Association
+c:\Freescale\prog\linker.exe fibo.prm
.%if(%Exist(edout),,%Message(No Messages found!)%Cancel)
.%ErrClr()
.%ErrGet(edout)
Figure 9.8 DA-C Linker Settings