Freescale Semiconductor Microcontrollers - Manual (Page 469)

HCS08 P&E Multilink/Cyclone Pro Connection
Connection Procedure
469 Microcontrollers Debugger Manual
Figure 19.3 HCS08 Connection Assistant Interface Selected
Trim Control
The Use custom trim reference frequency option allows the user to select a custom trim
value for the target device (valid only for devices with an Internal Clock). The allowable
trim value is only limited by the device itself; the user can input any value within the valid
internal clock frequency range. Note that the valid internal clock frequency range and the
default trim value for the currently selected device/algorithm are displayed as well. For
more information about the specific functionality of the internal clock source, see the
Freescale Data Sheet for your specific device.
Hotsync Button
The Hotsync button in the Connection Assistant (see Figure 19.3 ) allows the user to
connect to an already running target.