Freescale Semiconductor Microcontrollers - Manual (Page 702)

Flash Programming
NVMC Graphical User Interface
702 Microcontrollers Debugger Manual
NVMC Graphical User Interface
The NVMC utility is integrated into the debugger as an extension of certain debugger
connections. If the NVMC utility is available, your connection menu includes a Flash
selection.
Figure 32.5 HCS08 Open Source BDM Connection Menu Example
Modules and Module States
In the following sections, the expression available modules means all the FLASH or
EEPROM on-chip modules that the NVMC dialog box lists. The module definitions
correspond with the CPU derivative technical summary and special technical
considerations. If an on-chip module consists of several independent blocks, the NVMC
dialog box might list all of these blocks. However, typically groups the entire non-volatile
on-chip blocks under one single listed module and separates relevant and important non-
volatile memory blocks (such as mirrored non-banked memory range), and provides an
individual/selective module for these.
NOTE Refer to Hardware Considerations for more information about the Flash
modules of your CPU derivative.
Other important expressions are:
• Enabled — An enabled module is a module currently active on the chip. It is
possible to read (as a ROM) or program an enabled module.