Freescale Semiconductor Microcontrollers - Manual (Page 345)

MON08 Interface Connection
Connection Procedure
345 Microcontrollers Debugger Manual
View Register Files Option
The View Register Files menu option also gives the user the option of running the register
file viewer/editor. If register files are available for the device that you have chosen, the
Choose a Register Block window (see
Figure 12.12 ) opens. You may also open it by
entering the R command in the Command Window command line.
Figure 12.12 Choose A Register Block Window
If register files are installed on the host computer, selecting a block brings up the Register
Block register listing (see
Figure 12.13 ), which shows a list of the associated registers,
their addresses, and their descriptions. This begins interactive setup of system registers
such as I/O, timer, and COP watchdog.
Figure 12.13 Timer Interface Module Register Listing
Selecting a file brings up the Register Window (see Figure 12.14 ), which displays the
values and significance for each bit in the register. The registers can be viewed and their
values modified, and the values can be stored back into debugger memory.
Figure 12.14 Register Window