Freescale Semiconductor Microcontrollers - Manual (Page 410)

HC08 FSICEBASE Emulator
Setting Up the System
410 Microcontrollers Debugger Manual
4. Select appropriate processor from Processor drop-down menu
5. Select appropriate connection. To specify the FSICEBASE as the connection, select
FSICE emulator.
6. Click OK — The debugger configures itself to work with the connection that you
specified.
Notice that the main menu of the debugger reflects your selection. The menu item between
the Run menu and the Component menu shows the name of the connection that you
selected. For example, if you selected FSICE emulator as the connection, the main menu
contains a menu item labeled FSICEBASE-HC08 as shown in
Figure 17.3 . The
FSICEBASE-HC08 list menu is also shown.
Figure 17.3 FSICEBASE Menu
Specifying Communication Information
When you start the debugger from the CodeWarrior IDE, the debugger automatically
prompts you to specify communication information. However, if necessary, you can
change the communication information directly from the debugger.
To specify communication information:
1. Start the debugger — the True-time Simulator & Real-time Debugger window
appears.
2. From debugger main menu, select FSICEBASE-HC08
The FSICEBASE-HC08 menu is between the Run menu and the Component menu. If
you do not see the FSICEBASE-HC08 menu, you need to specify the connection. For
more information on specifying a connection see
Specifying A Connection .