Freescale Semiconductor Microcontrollers - Manual (Page 416)

HC08 FSICEBASE Emulator
Specifying a Memory Map
416 Microcontrollers Debugger Manual
To Modify a Memory Map:
1. Start the debugger — the True-time Simulator & Real-time Debugger window
appears.
2. From debugger main menu, select FSICEBASE-HC08
The FSICEBASE-HC08 menu is between the Run menu and the Component menu. If
you do not see the FSICEBASE-HC08 menu, you need to specify the connection. For
more information on specifying a connection see
Specifying A Connection .
3. Select Memory Map — Memory Map dialog box opens ( Figure 17.7 )
Figure 17.7 Memory Map Dialog Box
4. Specify memory map information
a. From Memory list box, select portion of map to change
b. In Start text box, type new start address of range desired
c. In End text box, type new end address of range desired
d. Select Type of memory represented by the new range
e. In Comment text box, type new description of range if appropriate
f. Click Update button to update highlighted range, or Add button to add a new
range (be careful not to overlap ranges)