Freescale Semiconductor Microcontrollers - Manual (Page 393)

HC08 ICS P&E Multilink/Cyclone Pro Connections
Device Class Description
393 Microcontrollers Debugger Manual
Figure 15.14 Timer Interface Module Register Listing
Selecting a file brings up the Register Window (see Figure 15.15 ), which displays the
values and significance for each bit in the register. The registers can be viewed and their
values modified, and the values can be stored back into debugger memory.
Figure 15.15 Register Window
Device Class Description
The following device information summarizes the different classes of boards available to
the user. Detailed information about specific devices is available from Freescale.
Class 5 Device
P&E MON08 Cyclone Device connects to PC via a serial port. The Cyclone to target
connection takes place via a standard 16 pin MON08 ribbon cable. MON08 Cyclone
Device allows one to auto detect the baud rate as well as auto cycle the power through the
target.
Class 7 Device
P&E MON08 Multilink and USB MON08 Multilink cables connect to the target via a
standard 16 pin MON08 ribbon cable. MON08 Multilink and USB MON08 Multilink
allow one to auto detect the baud rate as well as auto cycle the power through the target.