Freescale Semiconductor Microcontrollers - Manual (Page 333)

333 Microcontrollers Debugger Manual
12
MON08 Interface
Connection
The MON08 connection setting permits a connection to Class 1-4 devices. Refer to the
descriptions below for a definition of each interface class.
MON08 connection mode allows the user to debug code, as the firmware is fully resident
in the FLASH of the microprocessor. The operation of all modules fully reflects the actual
operation of the on-board resources.
Connection Procedure
To make the MON08 Interface debugger connection:
1. Choose the MON08 Interface option from the Set Connection dialog box
Figure 12.1 Set MON08 Interface Connection
2. Click the OK button - The P&E Connection Manager window opens with its Connect
Target tab selected.