Freescale Semiconductor Microcontrollers - Manual (Page 276)

HC08 Full Chip Simulation
Configuration Procedure
276 Microcontrollers Debugger Manual
IICDO
The IICDO command displays a window, which shows data shifted in as well as shifted
out of the IIC peripheral. An arrow is used to point to the last output value transmitted/
received. The maximum number of output values that the buffer can hold is 256.
Syntax
>IICDO
Example
IICDO
View data from the input/output log buffer for IIC simulation.
IICCLR
Use the IICCLR command to flush the input and output buffers for MMIIC simulation.
This resets the buffers and clears all values. Notice that if the MMIIC is currently shifting
a value, this command allows the MMIIC to finish the transfer.
Syntax
>IICCLR
Example
>IICCLR
Clear input and output buffers for IIC simulation.
FCSMSCAN Controller Module
The MSCAN Controller Module fully simulates the operation of the MSCAN08 Protocol
Version 2.0 based device, including:
• Flag polling
• Interrupt enabled mode
• 0-8 bytes data length
• Transmission and reception of external data