Freescale Semiconductor Microcontrollers User Manual
Page 413
HC08 FSICEBASE Emulator
Setting Up the System
413
Microcontrollers Debugger Manual
Figure 17.4 FSICEBASE Configuration Utility Window
3. Click Connect to FSICEBASE button — FSICEBASE Communication dialog box
4. Select USB
NOTE
You can also use the default IP address to connect through TCP/IP.
5. Click OK — the FSICEBASE Configuration Utility connects to the FSICEBASE
6. Click Network tab of FSICEBASE Configuration Utility
7. In Address text box, type the IP address that you want to assign to the FSICEBASE.
NOTE
All hosts on a network must have a unique IP address. If you are connecting the
FSICEBASE to a Local Area Network (LAN), consult with your network
administrator to obtain a valid IP address.
8. From Mask combo box, select the subnet mask that you want to assign to the
FSICEBASE
NOTE
All the hosts in a sub-network must have the same subnet mask. For that
reason, if you connect the host computer directly to the FSICEBASE (not
through a LAN), you must ensure that the host computer uses the same subnet
mask as the FSICEBASE.