Freescale Semiconductor Microcontrollers - Manual (Page 414)

HC08 FSICEBASE Emulator
Specifying a Memory Map
414 Microcontrollers Debugger Manual
9. If applicable, in Default Gateway text box, type the IP address that you want the
FSICEBASE to use as the gateway to connect to a network.
10. If applicable, in Broadcast Address text box, type the IP address that you want the
FSICEBASE to use as the broadcast address on the network
NOTE The broadcast IP address is the last IP address in the range of IP addresses on a
network. The broadcast address is reserved by the network to allow a single
host to make an announcement to all hosts on the network. Consult your
network administrator for more information.
11. Click Change button
The FSICEBASE Configuration Utility displays the IP Address Change Confirmation
dialog box (
Figure 17.5 ) with the information that you specified. If information is
wrong, click No to return to the Network tab and correct the information.
Figure 17.5 IP Address Change Confirmation Dialog Box
12. Click Yes
The FSICEBASE Configuration Utility assigns the new IP information to the
FSICEBASE.
Specifying a Memory Map
Different MCU designs require different memory map configurations of the FSICEBASE
system.
A personality file defines memory maps for particular MCUs. The personality file defines
the memory map of each MCU supported by an emulator module (EM). Personality files
ship with the separately purchased EMs. Refer to the appropriate EM user’s manual to
determine the personality files used by a particular EM module.