Freescale Semiconductor Microcontrollers - Manual (Page 490)

HCS08 Serial Monitor Connection
First Steps from Within an Existing Project
490 Microcontrollers Debugger Manual
Figure 21.3 Monitor Setup Window - Monitor Communication Tab
8. Press the OK button. The HCS08 Serial Monitor connection reads the device silicon
ID. This ID can match several derivatives.
9. Set the correct derivative matching your hardware in the Derivative Selection dialog
box.
Figure 21.4 Derivative Selection Dialog Box
10. Press the OK button. The Monitor Setup window is opened again, to propose to use
the “mirrored vector table” feature. See Vector Redirection in the Serial Monitor for
MC9S08GB/GT Application Note AN2140/D for all details. We recommend that you
use the Vector Table Mirroring feature. Otherwise, vectors cannot be programmed as
captured and protected from erasing or overwriting by the HCS08 Serial Monitor.