Freescale Semiconductor Microcontrollers - Manual (Page 481)

HCS08 Open Source BDM Connection
First Steps From Within an Existing Project
481 Microcontrollers Debugger Manual
Select Derivative Option
Select HCS08 Open Source BDM > Select Derivative to display the Select Derivative
Dialog Box .
NOTE If the debugger recognizes only one derivative, this menu entry is not available.
Unsecure Option
Select HCS08 Open Source BDM > Unsecure to unsecure the device when necessary.
This leads to the
Information Required to Unsecure the Device dialog box.
Trigger Module Settings
Select HCS08 Open Source BDM > Trigger Module Settings to open the Trigger Module
Settings dialog. For more information see
HCS08 On-Chip DBG Module .
Bus Trace
Select HCS08 Open Source BDM > Bus Trace to open the Trace component window
within the debugger main window. For more information see
HCS08 On-Chip DBG
Module .
Flash Option
Select HCS08 Open Source BDM > Flash to open the Non-Volatile Memory Control
dialog box. For more information see
Flash Programming .
Reset to Normal Mode Option
Select HCS08 Open Source BDM > Reset to Normal Mode to reset the hardware CPU to
normal mode.
Show Status Option
Select HCS08 Open Source BDM > Show Status to display the Show Status Dialog Box .