Freescale Semiconductor Microcontrollers - Manual (Page 151)

Debugger Components
Visualization Utilities
151 Microcontrollers Debugger Manual
7-Segment Display instrument attributes are shown in Table 3.53
.
Switch Instrument
Use the Switch instrument to set or view a definite bit ( Figure 3.95 ). The Switch
instrument also provides an interesting debugging feature; you can let it simulate bounces,
and thus check whether your algorithm is robust enough. Four different looks of the
switch are available: slide switch, toggle switch, jumper or push button.
Figure 3.95 Switch Instrument
Switch instrument attributes are shown in Table 3.54 .
Table 3.53 7-Segment Display Instrument Attributes
Attribute Description
Decimalmode Displays the first four or the second four bits of one byte in
hexadecimal mode. When it is switched off, each segment
represents one bit of one byte.
Sloping Switches the sloping on or off.
Display Version Selects the appearance of the instrument. Two versions are
available.
Color if Bit = = 1 Defines the color of an activated segment. You may also set the
color to transparent.
Color if Bit = = 0 Defines the color of a deactivated segment. You may also set
the color to transparent.
Outlinecolor Defines the color of the segment outlines. You may also set the
color to transparent.
Table 3.54 Switch Instrument Attributes
Attribute Description
Bitnumber to
Display Specifies the number of the bit you want to display.
Display 0/1 Enables ability to display the value of the bit in its upper left corner.