Figure 11.62 – Freescale Semiconductor Microcontrollers User Manual
Page 326
Advertising
HC08 Full Chip Simulation
Configuration Procedure
326
Microcontrollers Debugger Manual
Figure 11.62 USB OUT Buffer
Notice in
the DATA0 packet output during the data stage. This packet
contains the data found in the device descriptor table in the code. This shows exactly what
USB packet information was sent out from the device.
Figure 11.63 USB Packets IN Setup
Once we get through the status stage, which requires an OUT packet along with an empty
DATA0 packet from the host to be received, we get the USB IN window to look like that
shown in
and the USB out window to look like that shown in
Advertising