Freescale Semiconductor Microcontrollers - Manual (Page 367)

HC08 P&E Multilink/Cyclone Pro Connection
Connection Procedure
367 Microcontrollers Debugger Manual
7. To add a serial/parallel port P&E device such as Cyclone Pro Serial, MON08
Multilink and Cyclone Pro Ethernet (IP outside of subnet mask), proceed to the
Interface Selection Window by pressing the Add A Connection button on this tab of
the Connection Manager window. See
Figure 14.5 . For more information about
configuring Cyclone Pro for ethernet operation, refer to the Cyclone Pro User's
Manual.
Figure 14.5 Interface Selection Dialog Box
8. To remove a manually configured interface, click on the Remove Connection button
on this tab of the Connection Manager window and choose the interface to be deleted.
See
Figure 14.6 .
Figure 14.6 Connection Manager Dialog Box - Remove A Manually Configured Multilink/
Cyclone Pro Interface