Freescale Semiconductor Microcontrollers - Manual (Page 365)

365 Microcontrollers Debugger Manual
14
HC08 P&E Multilink/Cyclone
Pro Connection
The HC08 P&E Multilink/Cyclone Pro Connection setting permits a connection to Class
5, 7 or 8 devices. See
Device Class Description for a definition of each interface class.
HC08 P&E Multilink/Cyclone Pro connection mode allows the user to debug code, as the
firmware is fully resident in the FLASH of the microprocessor. The operation of all
modules fully reflects the actual operation of the on-board resources.
Connection Procedure
To select the P&E Multilink/Cyclone Pro connection:
1. Select the Component > Set Connection menu command.
2. Choose the P&E Multilink/Cyclone Pro option from the Set Connection dialog box, as
shown in Figure 14.1 .
Figure 14.1 Set Connections Dialog Box - P&E Multilink/Cyclone Pro Selected
3. Click the OK button - The Connection Manager Window opens with the Connect to
Target Tab exposed, as shown in Figure 14.2 .