Yokogawa DAQWORX - Manual (Page 107)

4-6 IM WX101-01E
Viewing information about the loaded data file
Information about the loaded data file (data file of the active viewer window) can be
viewed.
Procedure
1. From the menu bar, select “Information” then select “About Document.”
The “File Information” dialog box appears.
2. In this dialog box, you can enter or edit the header that will be used when printing
the data.
Type the print title into the entry box. Up to 32 characters can be entered.
Note
The print title can also be entered or edited from the “Printout Setup” dialog box. Changing the
print title here will also change the print title shown in the “Printout Setup” dialog box.
Arranging the Monitor Window
Procedure
1. Select “Tile” or “Cascade” from the “Window” menu. The multiple monitor windows
that are displayed are arranged accordingly.
Showing/Hiding the Tool Bar and Status Bar
Procedure
1. From the “View” menu, select the bar you wish to hide. The check mark in front
disappears and the bar is hidden. To show the bar, select the command again.
4.1 Displaying Waveforms on the Viewer Window