Yokogawa DAQWORX User Manual
Page 63
2-43
IM WX101-01E
1
2
3
4
5
6
7
8
9
Index
Configuring the DAQLOGGER
Displaying the Information of the Scanned and Recorded Data
Procedure
1. In the “DAQLOGGER Manager” window, select “Logger Information” from the “Logger”
menu. As shown below, the information about the data being scanned and recorded
is displayed.
Stopping the Scanning Operation
Stopping the Recording Operation
If you perform the following procedure when recording operation is in progress, the logger
stops recording data and enters the scanning operation. When scanning operation is in
progress, the logger stops scanning and enters a communication-stopped state.
Procedure
1. In the “DAQLOGGER Manager” window, click the “STOP” button.
The ongoing process (scanning or recording) stops.
2.9 Configuring the Logger