Yokogawa DAQWORX - Manual (Page 170)

6-15 IM WX101-01E
1
2
3
4
5
6
7
8
9
Index
Event Processor
Changing the Order of and Copying Process
16. In the table on the left side of the execution process page, click the number of the
process that you wish to change the order of.
17. The operation is selected using the +,▲,▼, , and buttons at the bottom
section of the table. The operation of each button is as follows:
“+”: Add
“▲”: Move upward
“▼”: Move downward
“ ”: Delete
“ ”: Copies the source settings to the process settings of the selected numbers.
“ ”: Sets the process settings of the selected number as the copy source.
Testing the execution process
18. In the table on the left side of the execution process page, press the button in the “Test”
column corresponding to the process you wish to test.
19. If “Target File” or “Prev. Output” is specified in the “Select File” list box, a dialog box
with a confirmation message appears. If there are no problems, click “OK.” The test
execution is started.
20. When the test execution is complete, a message box showing the result (success or
fail) appears.
6.1 Setting Events