Yokogawa DAQWORX - Manual (Page 208)

7-32 IM WX101-01E
Alarm/Relay/Remote
2. Click here (also selectable from [Setting] - [SETUP [Basic] Setting]-[Setting])
1. Select this tab
Select the controlled item
Select from 1 to
15 times
Copy/Paste the
selected range
Alarm
Select the alarm format. The selected items become blue.
Relay AND
Set the range of relays (from the first alarm relay) to take the AND logic. All other relays
will be set to OR logic. If [NONE] is selected, all relays will operate using the OR logic.
Remote (Option)
You can assign items to be controlled by the eight remote control terminals. This is
possible, if the remote function is available.
7.6 Setting DX100, DX200, MV100, MV200