Yokogawa DAQWORX - Manual (Page 368)

7-192 IM WX101-01E
Channel number or Tag display
Select to print or display measured values using channel number labels or tag names.
• Select either Channel or Tag. Note that the channel number will be printed/displayed
regardless of selection, if no Tag setting is made (or all spaces).
Number of Tag printing characters
Select 7, 8, 9, 10, 11, 12, 13, 14, 15 or 16.
• The default setting is 7.
• If the selected number of printing characters is less than the actually entered Tag, only
the number of characters selected here will be printed.
Dot-printing Recording System
Select it from the following systems. The default setting is NORMAL. To practically
record it, the RECORD must be turned on.
Normal:
• To record all object channels.
Alarm 1:
• To record only the channels with on-going alarm.
• Recording continues even if the alarm is released.
Alarm 2:
• To record only the channels with on-going alarm.
• Recording stops when the alarm is released.
Group:
• To record the channels which are set into a group only.
• Recorded only if “GR TREND” is set in the event/action function.
Printing when chart speed is changed (SPEED CHANGE PR)
When the chart speed is changed in dot-recording, select whether to print with the
changed chart speed or not.
• OFF : does not print.
• ON : prints.
Printing recording start/stop time mark (ON/OFF MARK PR)
In dot recording, select whether the record-start/stop time is printed or not.
• OFF : not printed.
• ON : printed..
Number of columns for digital printing (DIGITAL PR CLMN)
Select the amount of channels to be printed in one horizontal line.
• Select 1, 2, 3, or 4 columns.
• If Tag has been selected in selecting the channel number/Tag, this is limited to 3
columns. If Tag is set to 16 characters, the Tag entry is limited to two columns.
• As for DR130, Select 1 or 2 columns. If Tag is set to 8 characters, the Tag entry is
limited to one column.
Channel number printing pitch (CHANNEL PITCH)
For dot recording, select the number of millimeters for the channel number printing
interval. When Tag has been selected in channel number/Tag selection, the Tag
corresponding to the channel number is printed.
• OFF: not printed.
Title printing pitch (TITLE PITCH)
For dot recording, select the title printing interval in millimeters.
• OFF: not printed.
• 600 mm: printed every 600 mm.
• 1500 mm: printed every 1500 mm.
7.9 Setting DARWIN