Yokogawa DAQWORX - Manual (Page 121)

4-20 IM WX101-01E
Displaying the Results of Statistical Computation
The statistics are calculated over the data between cursors A and B, and the results are
displayed.
The statistics have the following 5 types of values: minimum, maximum, P-P, mean, and
RMS.
Procedure
1. In the graph or sheet viewer window, select the interval over which the statistics will
be computed by dragging and dropping the cursor. The position pointed to first is
cursor A, and the position where the point is dragged to is cursor B.
2. Click the “Statistics” button on the toolbar or select “Window” from the menu bar then
select “Statistics.”
Statistics button
The results are displayed in the “Statistics” dialog box.
Data range over which the statistics are calculated.
Note
• If you change a computation condition such as the computation interval, click the Calculate
button.
• The “Statistics” dialog box displays the tag names or tag numbers shown in the active
viewer window, regardless of whether the waveform display is turned ON or OFF.
• If the computation interval is not specified, the statistics are computed over the interval
between the first and the last data.
4.4 Using the Cursors