Index – Yokogawa DAQWORX User Manual
Page 229
7-53
IM WX101-01E
1
2
3
4
5
6
7
8
9
Index
Setting the Recorder
Copying and Pasting Setup Data
You can copy and paste settings using the [Copy], [Paste], and [Copy Details] buttons.
Selecting the Items That You Want to Copy
1.
Click the [Copy Detail] button.
The item selection dialog box opens.
2.
Select the items that you want to copy.
Items with a blue box will be copied.
Click the [X] button to close the item selection dialog box.
The item selection dialog box that opens when you click
the [Copy Detail] button
Setting items appear. An item with a blue box is selected.
An item with a gray box is not selected.
Paste to the copy destination
Copy the copy source settings
Click this button to open the item
selection dialog box and select the
items that you want to copy
Copying and Pasting Settings
1.
Select the copy source numbers (the [CH] row in this figure) and click the [Copy]
button.
* To specify multiple copy sources, drag over the numbers to select them.
2.
Select the copy destination numbers (the [CH] row in this figure) and click the
[Paste] button.
* To specify multiple copy destinations, drag over the numbers to select them.
The settings are copied and pasted.
7.7 Setting DX1000/DX2000