Yokogawa DAQWORX - Manual (Page 157)

6-2 IM WX101-01E
Setting Events
Procedure
Starting event settings
1. In the menu bar of the “DAQLOGGER Manager” window, choose Others > Event
Processor > Configuration.
The DAQLOGGER Event Processor dialog box appears.
Note
When the event processor is in execution, you cannot change the event settings.
Creating new events
2. Click “New.” The “Event Page” appears.
3. Enter the name of the event in the “Event Name” box.
4. Set “Display Tag” to “Tag Name” or “Tag Number.”
Note
• You can create up to 8 events.
• When selecting an arbitrary event, click the tab with the event name.
• The “Display Tag” setting is valid only on the specified event page.
• The “Display Tag” setting is not saved.
6.1 Setting Events