Yokogawa DAQWORX - Manual (Page 135)

4-34 IM WX101-01E
4.8 Exporting Data
You can cut out (copy) a section of a data file and save the result. This operation does
not change the original data.
Procedure
1. Select the range of data to be cut out using the cursors.
2. From the “Convert” menu, select “Export.”
The “Export” dialog box appears.
3. The range that was selected by the cursors are indicated in the “Start” and “End”
boxes using data numbers.
To change the data range to be exported, enter values in the appropriate boxes.
4. Click “File” to display the “Change the file name” dialog box. Change the file name
and destination as necessary and click “OK.”
Note
• The default file name is as follows:
“Original file name”-“first data number (8 digits) of the range to be exported”.mld
• You cannot export data from report data.
5. Click “OK” to create the file and close the dialog box. Click “Cancel” to close the
dialog box without creating the file.