Yokogawa DAQWORX - Manual (Page 154)

5-12 IM WX101-01E
Specifying the output file
Specify the output file name and save destination under “Output.”
The output type list box is fixed to “Directory.”
5. Click “Select.” Specify the directory in which to save the output file in the dialog box
that appears.
Note
• Do not specify an external storage medium such as a floppy disk for the save destination of
the output file, because saving to such medium takes a long period.
• Do not specify a root directory for the save destination of the output file.
• Make sure there is enough free disk space at the save destination.
Setting the division method
Set the division method under “Division.” For the procedure, see section 5.3, “Dividing
the Measurement Data File.”
Note
“Single Fixed” cannot be specified.
5.5 Restructuring Measurement Data Files