Yokogawa DAQWORX - Manual (Page 259)

7-83 IM WX101-01E
1
2
3
4
5
6
7
8
9
Index
Setting the Recorder
Option
• Value on Error
Specify whether to set the display for a computation error to [+Over] or [–Over].
• Overflow Sum, Ave
Specify how to handle
overflow data when it is detected in the SUM or AVE
computation of TLOG or CLOG. This setting is also applied to report generation.
Settings Description
Error Sets the computed result to computation error.
Skip Discards the overflow data and continues the computation.
Limit Uses a limit value in place of the overflow data and continues the computation.
• Overflow Min, Max, P-P
Specify how to handle overflow data when it is detected in the MAX, MIN, or P-P
computation of TLOG or CLOG. This setting is also applied to report generation.
Settings Description
Over Uses the overflow data as-is.
Skip Discards the overflow data and continues the computation.
• Report (1 to 4)
Select the type of data to output as reports.
Settings Description
OFF Does not output reports. You cannot set Report 1 to [OFF].
Ave Outputs the average value.
Max Outputs the maximum value.
Min Outputs the minimum value.
Sum Outputs the sum value.
Instant Outputs the instantaneous value.
• File kind
Specify the method used to create report files.
Settings Description
Split Saves each type of report to a separate file.
Combined Saves the report data of two types in a single file.
Separate2 Saves a collection of reports, such as the hourly reports for a day or the daily
reports for a month, to a file (release numbers 4 and later).
• Template Function (Release numbers 4 and later)
You can create report templates in XML spreadsheet format and use them to
automatically create custom report files. To use templates, select [ON]. This setting is
fixed at [OFF] when [File kind] is set to [Separate2].
7.7 Setting DX1000/DX2000