Yokogawa DAQWORX - Manual (Page 428)

7-252 IM WX101-01E
Alarm and Tag
The settings are the same as the measurement channels. For details, “Measurement
Channels Settings” (page 7-220).
TLOG Computation
Timer
Select one of the timers (1 to 3) set in the setup mode.
The computation interval of TLOG computation is set to the time assigned to the selected
timer.
Sum Scale
Set the sum scale.
Rolling Average
Rolling Average Computation ON/OFF
Select whether to compute the rolling average.
Interval
Select the sampling interval when rolling average is activated.
Times (Number of Samples)
Select the number of samples (number of data points used to compute the rolling
average).
Zone, Graph, Partial, and Color
The settings are the same as the measurement channels. For details, “Measurement
Channels Settings” (pages 7-220 and 7-221).
Constant
You can set constants to be used in the expression. Up to 12 constants (CX1000) or up
to 30 constants (CX2000) can be specified.
7.10 Setting CX Series