Yokogawa DAQWORX - Manual (Page 150)

5-8 IM WX101-01E
When set to “Single Fixed”
5. From the “Type” drop-down list, choose “Single Fixed.”
• When specifying the position in terms of the data number
6. Under “Position Setting,” click the “Data No.” option button.
7. Enter the first data number of the extracted position in the “Start Data No.” text box.
8. From the list box, select “End Data No.” or “Data Count” and enter the data number
of the last data point to be extracted or the number of data points in the text box.
9. Click “OK” to execute the divide operation. Click “Abort” to abort the operation.
• When specifying the position in terms of time
6. Under “Position Setting,” click the “Time” option button.
7. Enter the start position for extracting the data in terms of time from the beginning of
the source file in the “Start Time” box.
8. From the list box, select “End Time” or “Time” for the condition for the last data point
to be extracted. If you select “End Time,” enter the relative time from the beginning
of the source file. If you select “Time,” enter the time span for extracting the data. In
the example in the figure, data is extracted from the data at 1st day 2nd hour to 3rd
day 4th hour.
9. Click “OK” to execute the divide operation. Click “Abort” to abort the operation.
Note
• The file is not created if the specified position (for extracting) does not exist within the
source file.
• Abort operation may take a long time to be processed.
5.3 Dividing Measurement Data Files