Yokogawa DAQWORX - Manual (Page 78)

2-58 IM WX101-01E
Scan Stop: Received scan stop command.
Record Stop: Received record stop command.
Event Processor Start: Received Event Processor start command.
Event Processor Stop: Received Event Processor stop command.
User Event: User event sent.
2. Choose Control Server > Port No., and enter the port number to which the remote
control software will connect. Be sure not to enter settings that overlap with other
applications.
3. To change the login or password, choose Control Server > Login Password. The
Current Login Password dialog box appears.
4. Enter the current password. A dialog box for entering the new password appears.
5. Enter the new password.
Note
If the control server is terminated directly, the message, “M4132 OK to stop server?” appears. If
you select Yes and a client is connected, communication is disconnected. Note that the control
server will not start the next time DAQLOGGER Manager is started.
2.13 Setting Up the Control Server