Yokogawa DAQWORX - Manual (Page 433)

7-257 IM WX101-01E
1
2
3
4
5
6
7
8
9
Index
Setting the Recorder
Group/Trip Line
Click here. (Or choose the
[Setting] menu - [SET [Regular] Setting].)
Click the tab of the group
to be configured.
Select the channels that you want to
register in the selected group (blue: ON).
Select the color of
the trip line.
Specify a group name.
Set the trip line value by
dragging the slider.
Set the trip line by
specifying a value.
Turn ON/OFF the trip line display
Group Name
Use up to 16 characters can be entered for the group name.
Channel Configuration
The maximum number of channels that can be assigned to a group is 6 for the CX1000
and 10 for the CX2000. The assigned channels are listed under [Channel Configuration].
Trip Line
Up to four trip lines can be set to one group.
With regard to the trip lines set here, the first and second settings (No. 1 and No. 2) refer
to the trip lines in Data Monitor and Data Viewer. If you change them here, they also
change in Data Monitor and Data Viewer. For details about the other trip line settings,
refer to the CX User’s Manual (IM 04L31A01-01E or IM 04L31A01-03E).
7.10 Setting CX Series