Yokogawa DAQWORX - Manual (Page 443)

7-267 IM WX101-01E
1
2
3
4
5
6
7
8
9
Index
Setting the Recorder
7.13 Handling Setting Data Using a Floppy Disk
Importing Files
The setup parameters on the floppy disk are loaded.
For VR, this function is used because the setup parameters of SETUP mode cannot be
transmitted via communications. It is also used to edit the settings of VR and DARWIN
that do not have the communication option on the DAQLOGGER Hardware Configurator.
This function can also be used on DX, MV, CX and DARWIN with communication
functions.
DA and µR are not applicable.
The file type and extension are as follows:
. pnl : SET mode of VR series recorders
. pns : SET UP mode of VR series recorders
. pnl : DX (Excluding the DX1000/DX2000)/MV (Excluding the MV1000/MV2000)
series recorders
. pcl : CX series recorders
. pnl : SET mode of DC100/DR130/DR200 recorders
. set : SET UP mode of DC100/DR130/DR200 recorders
For VR, DX, MV, CX
Procedure
1. Load data from the settings file created by the recorder.
For the VR series, in the menu bar of the “DAQLOGGER Hardware Configurator”
window, select “File”- “File Import,” then “Set Mode” or “Setup Mode.”
For the DX series, in the menu bar of the “DAQLOGGER Hardware Configurator”
window, select “File”- “File Import.”
The “Open File” dialog box appears.
(File names)
2. Select the file to load and click “OK.”