Yokogawa DAQWORX - Manual (Page 85)

3-7 IM WX101-01E
1
2
3
4
5
6
7
8
9
Index
Using Data Monitor
Setting the Display Conditions for Individual Groups
Waveforms are displayed on a group-by-group basis. A group can contain up to 12 tags,
and the maximum of 32 groups can be registered.
Procedure
1. Click the “Display Settings” button on the tool bar or, in the menu bar, select “View”
then “Display Settings.”
The “Display Settings” dialog box appears.
Tag to be registered
Bar graph Display scale Turn ON/OFF trip point display Meter
Y-axis display Group tab Thermometer
Meter type
Zone (display position)
Display
color
Turn ON/OFF
trip point
displays in the
selected range
Collectively set
defaults in the
selected range
Collectively set the trip
point in the selected
range as follows:
Trip1: Max.value of the scale
Trip2: Min.value of the scale
Copy the zone settings of
the first waveform number
in the selected range to all
wave waveform number in
the selected range
Copy the Y-axis settings of the first
waveform number in the selected
area to all wave waveform number in
the selected range
Collectively turn ON/OFF the
multiple-Y-axis displays in
the selected range
Set tags in order from the tag
name of the first waveform
number in the selected range
Collectively turn
ON/OFF the waveform
displays in the
selected range.
Turn ON/OFF
the display Set trip points
Select items
to copy
Collectively set
defaults in the
selected area
Collectively set
meters in the
selected area
Copy
button
Paste button
2. Click the group tab to display the group you wish to set.
This operation switches between the condition setting tab panels for individual groups.
3. In the “Group Name” box, a group name is initially shown in the default format of
“Group+2-digit number.”
To change this default group name, type the name in the “Group Name” box. Up to
16 characters can be entered for a group name.
4. To register/change/delete a member tag of the group, click the “Tag Number” cell you
wish to operate.
The “Tag Name” dialog box appears.
Click the new tag name you wish to assign. If you wish to assign no tag, click “None”
in the bottom.
Note
This dialog box shows the tag names that are set using the Tag Editor.
After the “Tag Name” dialog box closes, the new setting is shown in the “Display
Settings” dialog box.
3.2 Setting the Display Conditions