Yokogawa DAQWORX - Manual (Page 328)

7-152 IM WX101-01E
7.8 Setting MV1000/MV2000
Ethernet
TCP/IP
Set the IP address to a fixed IP address or obtain it automatically (DHCP).
Consult with your network administrator for the network parameters such as the IP
address, subnet mask, default gateway, and DNS.
When using a fixed IP address
• DHCP
Set [DHCP] to [OFF].
• IP Address
Set the IP address to assign to the MV1000/MV2000.
• Subnet Mask
Set the subnet mask according to the system or network to which the MV1000/
MV2000 belongs.
• Default Gateway
Set the IP address of the gateway.
• Host Name
Set the MV’s host name using up to 64 alphanumeric characters. You do not have to
set this parameter.
• Domain Name
Set the network domain name that the MV1000/MV2000 belongs to using up to 64
characters. You do not have to set this parameter.
• Server Primary, Server Secondary
Register up to two IP addresses for the primary and secondary DNS servers.
• Domain Primary, Domain Secondary
Set up to two domain suffixes: primary and secondary.
When obtaining the IP address from DHCP
• DHCP
Set [DHCP] to [ON].
• DNS accession
To automatically obtain the DNS server address, select [ON]. Otherwise, select [OFF].
If you select [OFF], you must set the IP address of the DNS server.
• Host-Name Register
To automatically register the host name, select [ON].