Yokogawa DAQWORX - Manual (Page 197)

7-21 IM WX101-01E
1
2
3
4
5
6
7
8
9
Index
Setting the Recorder
Setting the Measurement Channels
Double-clicking the “CH” cell in this panel opens the “Channel Setting” dialog box (see
page 7-24) for input. You can input from either the panel or the dialog box.
Select this tab
Double-click to set the channel
Difference computation
Scale
Square root
Select the input mode
Select the range/type
Select the alarm type
Select the relay number
Select sampling count
Turn ON/OFF the partial
expanded display
Set the value to the minimum value possible
Set the value to the
maximum value possible
Select the reference for the difference
computation
Set the span
Enter the scale Enter the scale unit
Enter the alarm value
Enter the tag name
Enter the delay period
Enter the display zone
Select the graph setting
Select the channel
display color
Initialize
Initialize
Set the value to the minimum value possible
Set the value to the maximum value possible
Turn OFF at once
Copy the settings of the first channel in the selected range to all other channels
Set the selected range at once
Turn ON/OFF at once
7.6 Setting DX100, DX200, MV100, MV200