Yokogawa DAQWORX - Manual (Page 75)

2-55 IM WX101-01E
1
2
3
4
5
6
7
8
9
Index
Configuring the DAQLOGGER
2.12 Setting Up the Monitor Server
The Monitor Server transfers the scanned or recorded data to the remote monitor* that is
connected via the Ethernet network. Up to 16 remote monitors can be connected.
The remote monitor can be used to display and monitor the received data.
Starting the Monitor Server
Procedure
1. Click “M.SERV” in the “DAQLOGGER Manager” window.
The Monitor Server starts and the “DAQLOGGER Monitor Server” window appears.
The Monitor Server is running when the “DAQLOGGER Monitor Server” window is
displayed. When a remote monitor connects to the Monitor Server, the host name
and the client name appears in the “DAQLOGGER Monitor Server” window.
(Host Name)
(Client Name)
Setting Up the Monitor Server
To change the port number, perform the following procedure. The default port number is
“50280.”
The following procedure can be performed while communicating with a remote monitor.
However, the new port number is activated when the Monitor Server is restarted.
Procedure
1. In the “DAQLOGGER Monitor Server” window, select “Port No.” from the “Monitor
Server” menu.
The “Port No.” dialog box opens.
Enter the port number (0 to 65535) and click “OK.”