Yokogawa DAQWORX - Manual (Page 111)

4-10 IM WX101-01E
Note
• The trip points can be set within the range of scale values specified for each tag.
• Trip points 1 and 2 are displayed in red and blue, respectively.
• The trip points can be moved by dragging them to the graph viewer.
• When the display position of a trip point is entered, the check box in the “Trip 1” or “Trip 2”
cells is automatically turned ON (blue). If you do not wish to display the trip point, click the
check box to turn it OFF.
10. Click the “Color” cell of the tag you wish to change the display color.
The “Color” dialog box appears.
11. Click one of the basic colors you wish to change to.
Note
To create a new color, click the “Define Custom Colors” button. A palette is displayed in the
dialog box. Use this palette to create a new color.
12. Click the “OK” button in the “Color” dialog box.
The waveform is displayed in the new color.
13. In the “General Display Settings” dialog box, click the “OK” button.
The new conditions are made effective and the “General Display Settings” dialog box
closes.
4.2 Setting the Display Conditions