Yokogawa DAQWORX - Manual (Page 358)

7-182 IM WX101-01E
Logging Recording
• Normal : Depends on the (SETUP) Recording Format settings for the Recording
interval in digital printing/logging. It can be set to Single or Multiple:
Single- Interval for timer one.
Multiple- Intervals selected from 6 kinds of timers.
• When an event occurs : Interval set as Chart Speed 2.
Entering a Header
HEADER LINE No. : One header can consist of up to five lines.
LINE 1 to 5 : The header contents can be entered here using up to 80 alphanumerics
for each line, and thus up to 400 characters for the entire header. The default setting
is all spaces. To print the header press the Print button on the DR and select HEADER
START from the menu.
Entering a Title
One title can be set, using up to 32 alphanumerics. Set the Title printing pitch to 600
mm, 1500 mm or set it OFF, in the (SETUP) Recording Format setting screen.
Setting the List Format
The List Format (LIST FMT) setting specifies which setting information will be printed out
in case of list printouts.
Setting Messages (DC100, DR only)
Messages can be printed out on the occurrence of an alarm, instantly using the FUNC
menu, or as an event/action setting.
Message tab
Set the message using maximum 16 alphanumericals or the symbols :, #, %, &, ( ), *, +,
-, ., and /.
7.9 Setting DARWIN