Yokogawa DAQWORX - Manual (Page 31)

2-11 IM WX101-01E
1
2
3
4
5
6
7
8
9
Index
Configuring the DAQLOGGER
Setting the password protection ON
With a project for which the use of password function is specified, this operation turns the
password protection ON. This operation is disabled while Hardware Configurator, Tag
Editor, or Software Configurator is running.
Procedure
1. In the menu bar of the “DAQLOGGER Manager” window, select “File” then “Password
Protection.”
The password protection is turned ON.
Setting the password protection OFF
This operation sets the password protection to OFF.
Procedure
1. In the menu bar of the “DAQLOGGER Manager” window, select “File” then “Password
Protection.” The “Input Password” dialog box appears.
2. Type the password and click “OK.”
If the password does not match, you cannot turn the protection OFF.
Note
• Protection by a password will not be established by just specifying the use of password
function. You must also set the password protection to ON.
• A password must be within 16 characters. Any character is acceptable.
• Do not forget the password you set.
2.5 Setting the Security