Yokogawa DAQWORX - Manual (Page 191)

7-15 IM WX101-01E
1
2
3
4
5
6
7
8
9
Index
Setting the Recorder
• Remote Control (for VR200 S2 only)
Assigns a function to the input terminal of the remote control.
• Communication (only for models with the communication function)
Changing VR system configuration
If necessary, change the system configuration such as the presence or absence of
options to match the VR that is to be configured.
Changing the system configuration initializes the settings of the SET mode and SETUP
mode. Perform changes in the system configuration first.
The changes in options are reflected in the “Recorder List” window.
Procedure
1. Open the setting window of the VR of which the system configuration is to be
changed, and select “System Configuration” from the “System” menu of the
“DAQLOGGER Hardware Configurator” window. The “System Configuration” dialog
box opens.
2. Set the model, options, etc. to match the VR.
3. When you finish setting the parameters, click “OK.” The setup parameters are
applied to the setup items in the tab panel.
7.4 Setting VR Series