Yokogawa DAQWORX - Manual (Page 470)

8-17 IM WX101-01E
1
2
3
4
5
6
7
8
9
Index
Using DAQLOGGER Client Package
8.5 Using the Remote Controller
The following remote control operations can be performed via Ethernet.
• Start/stop scan on the logger software.
• Start/stop recording.
• Start/stop the Event Processor.
• Execute events on the Event Processor manually.
To use the remote control functions, you must first enter control server settings on the
DAQLOGGER Manager.
Using the Remote Control Software
Procedure
1. Choose Start > Programs > YOKOGAWA DAQWORX > DAQLOGGER Client >
Remote Controller to start the remote control software.
Closes the remote control software
Connection status
Blue: not connected
Red: connected
When not connected, click to display
the communications settings screen
2. Press the Communications settings button to display the communications setting
screen.
3. Enter the Host Name, Port No., and Login Password.
Host No. : Specifies the PC used as the remote control server.
Port No. : Specifies the port number set on the remote control server.
Login Password : The password set on the remote control server.
4. Press OK to save the host name and port number. A maximum of 10 host names
and port numbers can be saved. The saved host names and port numbers are
displayed in the pull down menu.
5. Press Connect to connect with the specified PC.
6. By pressing a button on the DAQLOGGER Remote Controller, you can operate the
DAQLOGGER running on the connected PC. If you press the User Even button,
the process set as the user event is executed per the event conditions on the Event
Processor of the connected DAQLOGGER (see page 6-3).
If password protection is activated on the connected DAQLOGGER manager, the
password entry screen appears. Also, an icon indicating that password protection is
active will appear on the screen along with a message. Enter the password for the
manager.