Yokogawa DAQWORX User Manual

Page 465

Advertising
background image

8-12

IM WX101-01E

Procedure

Setting the Time Axis
• Selecting the displayed time

1. Click the “Time-Axis” menu.

2. Select the displayed time per cycle.

Note

The number of displayed data points for a single waveform is 1800. The time over which the

measured data can be monitored on the circular screen depends on the scan interval and the

step value (P. 8-1).

Setting the Y-Axis
• Waveform display limit

The circular window displays a limited range of values along the Y-axis that is
specified by the maximum and minimum values under “Scale” in “General Display
Settings.”

Alarm Indication

You can select the position where the alarm will be indicated, inside or outside the

waveform display area of the circular window.

1. Select “View” - “Alarm.”

The alarm will be indicated.

2. Select “View” - “Alarm Inside” or “Alarm Outside”

Alarm Inside

Alarm Outside

8.2 Monitoring the Data

Advertising
This manual is related to the following products: