Yokogawa DAQWORX - Manual (Page 27)

2-7 IM WX101-01E
1
2
3
4
5
6
7
8
9
Index
Configuring the DAQLOGGER
Copying Project
You can copy project settings from one project to another.
Procedure
1. Same as the operation in “Creating a New Project.”
2. Same as the operation in “Copying a New Project.”
3. Select the project you want to copy settings to in the Project list. Only select a
project whose operation level is Supervisor.
4. Click Copy. The Copy Project dialog box appears.
5. Select the project from which you wish to copy settings, as well as the settings to be
copied. Only the settings appearing in the list may be copied. The items that were
not set for the selected project are dimmed.
Deleting an Existing Project
To delete an unneeded project, do the following.
Procedure
1. Same as the operation in “Creating a New Project.”
2. Same as the operation in “Creating a New Project.”
3. In the “Project” list box, select the project.
4. Click the “Delete” button.
Note
• If there is only one project of “Supervisor” operation level, you cannot delete this project.
• If there is only one project which does not use password protection, you cannot delete this
project.
2.4 Setting a Project